Setting up a commercial inflatable correctly is crucial for both safety and longevity. Follow these steps to ensure everything is in place for an optimal experience:
1. Select a Suitable Location
- Choose a flat area with at least 5 feet of clearance on all sides.
- Ensure you have sufficient electrical power within 50 feet of the blower.
- If setting up on a hard surface, use a ground sheet under the inflatable to minimize wear.
2. Determine the Entrance and Inflation Tube Placement
- The inflation tube is typically located at the beginning of the roll, while the entrance and exit are at the opposite end. Make sure to identify the front of the inflatable before starting.
3. Unroll the Inflatable
- Carefully unroll the inflatable, placing it in the designated location.
4. Connect the Blower
- Securely attach the blower to the inflation tube. Double-check that it’s tightly connected to prevent any air leaks.
- Close any unused inflation tubes and ensure all vents and zippers are sealed.
5. Anchor the Inflatable
- If outdoors, use sturdy ground stakes to anchor the inflatable. For indoor setups, sandbags work well.
- Use ratchet or cam buckle-style tethers to easily adjust the tension.
- Refer to your owner’s manual for the correct number and size of anchors needed.
6. Inflate the Inflatable
- Turn on the blower. Depending on the size of your inflatable, it may take 2 to 5 minutes to fully inflate.
7. Check for Loose Tethers and Adjust
- Inspect the tethers to make sure they’re securely fastened but not over-tightened.
- Adjust them as necessary for stability.
8. Create a No-Walk Perimeter
- Set up cones or delineator posts around the inflatable to create a safe perimeter and prevent unauthorized access.
9. Inspect and Adjust Lining
- During inflation, removable linings may become loose or wrinkled. Inspect them and make any necessary adjustments to ensure a smooth surface.
10. Read and Understand the Owner’s Manual
- Before allowing anyone to use the inflatable, ensure all operators have read and understood the owner’s manual for safety instructions.
Want a Visual Guide? Watch the Video!
If you’d like to see this process in action, check out our YouTube video on How to Setup Commercial Inflatables for a detailed demonstration.
<
For more helpful tips and tutorials, be sure to check out our How-To Videos Playlist on our YouTube channel and make sure to subscribe!
